3 Best Hot Air Blower for Mobile Phone Repairing | SMD Rework Station

Best Hot Air Blower for Mobile Phone Repairing is One that is Not Very Expensive (Cheap), Maintains Proper Heat and Air Control and Temperature and does not burn or get over heated. Here I will discuss about 3 Best Hot Air Blower for Mobile Phone Repair / SMD Rework Station / SMD Hot Air Gun. All these 3 Machines are Very Carefully Selected After Personally Using them for Years. I am in this Electronics Field for the Past Over 15 Years and Hence you can Trust My Words.

3 Best Hot Air Blower for Mobile Phone Repairing | SMD Rework Station

1. YIHUA 858D Hot Air Blower / SMD Rework Station

YIHUA 858D SMD Hot Air Rework Station is suitable for soldering SMD components, integrated chips with multiple pins and circuit boards. The outer enclosure of the main hot air blower machine is made of a superior iron alloy, which is immune to high temperature damage and is durable.

YIHUA 858D Features

1. The outer enclosure of the main Hot Air Blower machine is made of a superior iron alloy, which is immune to high temperature damage and is durable.
2. Common features of the handle of the brush-less fan type hot air gun:
   – The brush less-motor fan for the hot air gun has a standard service life of 20000 hours. The airflow is soft, uniform and heavy.
   – The hot air gun’s heating element employs brand new columned heating core developed with a ceramic process, having strong stability, resistance to impact and dropping, and extraordinarily vibration-mitigation ability.|
   – The outlet steel cylinder of the handle and the hot air gun nozzle are made of superior stainless steel with better conductivity and strong oxidation resistance.
3. Suitable for soldering SMD electronic components, integrated chips with multiple pins and printed circuit boards and widely applicable to production lines for electronic products, laboratories, schools, mobile phone repairing industry, household appliance maintenance department, etc.
4. Small cabinet design, space-saving and easy to transport and carry.

YIHUA 858D SMD Specification

• Operating Voltage: AC 220V±10% 50Hz
• Output Power: 650W
• Working Condition: 0～40℃
• Relative Humidity: ＜80％
• Storage Temperature: －20～80℃
• Dimensions: 26*16.5*14.8 cm
• Weight: 1.85KG
• Temperature Range: 100℃～500℃
• Display Mode: LED Digital Display
• Air Supply Mode: Brushless Fan
• Air Volume: 120L/min (Max)
• Temperature Stability: ±10℃ （Static State)
• Temperature Correction Mode: PID Digital Program Calibrate
• PID Temperature Correction Cycle: 200ms
• Heater: Ceramic Skeleton Heater
• Standard Packing List: Desoldering Station,  Manual, Air Gun Handle, 3 Nozzles (5mm 8mm 10mm), IC Extractor, Small Banner (for disassembly nozzle)

Packing List of YIHUA 858D

1. Main Unit + Blower Gun + Power Cord
2. User Guide / Manual
3. 3 Extra Nozzles (bayonet stainless steel nozzles)
4. 1 Pc Spanner

==>> Buy YIHUA 858D Hot Air Blower / SMD Rework Station

2. Quick 858D Hot Air Blower / SMD Rework Station

Quick 858D Hot Air SMD Rework Station is one of the Best Economical ESD Safe (Antistatic) Hot Air SMD Rework Station. Its Closed Loop Control Sensors, Intelligent Cooling System, Digital Display and Noise Free Design for Quite working environment are just few of its advantages. Thousands of technicians around the world trust Quick 858D Hot Air SMD Rework Station for Mobile Phone Repairing, Motherboard Repairing and for Repairing all different types of PCB.

Quick 858D Features

• ESD-Safe Body (Antistatic)
• Imported Air Pump that produces for low vibration and less noise for quiet working environment.
• Closed Loop Control Sensors for Temperature Accuracy and Stability
• Suitable for most SMD Components – QFP, PLCC, SOP, BGA and other IC chips and electronic components.
• Intelligent cooling system – After the station is shutdown, its air temperature comes down below 100 Degree Celsius and the Rework Station Automatically Cuts OFF Power Supply.
• Imported Heater that Heats fast and has long service life
• Adjustable Temperature Control.
• Large Digital LED Temperature Display.
• Hot air gun can be used to melt material or softening coatings, plastic, remove old paint film,
  remove non-dry tape, bending plastic tube, and outfit floor tile, heat shrink, mobile phone service,
  car decoration, refrigerator defrosting.
• Compatible with Lead-Free Solder Paste

Quick 858D Specification

• Input Voltage: 220 V AC (± 10%)
• Output Power: 280 Watt (Max)
• Air Pump: Membrane Type
• Temperature Range: 100 Degree Celsius to 480 Degree Celsius
• Air Output: 23 l/min (Max)
• Display: Digital LED Display
• Dimension: 245 (L) * 187 (W) * 135(H) mm
• Weight: 2. 5Kg.

IMPORTANT NOTE: Please do not forget to unscrew the screw which is below the main station. This is very important if you have not used a Hot Air SMD Rework Station before.

==>> Buy Quick 858D Hot Air Blower / SMD Rework Station

3. Soldron 878D Combined Rework Station

Soldron 878D Soldering Station / Rework Station combines the benefits of a Soldering Station and a SMD Hot Air SMD Rework Station. The Soldron 878D Multi Function ESD Safe Hot Air and Iron Digital Rework Station is the most economical combined SMD Rework station available in the market.

Soldron 878D Features

An advanced hybrid SMD Rework Station with both a soldering iron as well as a temperature controlled hot air blower attachment.

Soldering Iron Features

1. ESD safe
2. Lead Free Soldering Iron with Long Lasting Ceramic Heater.
3. Microcontroller based Smart Circuit Design.
4. Sleep function to save energy and conserve the soldering bit / increase bits life.

Hot Air Blower Gun Features

1. High Capacity Heater with Temperature Sensor for Uniform and Fast Heating.
2. Handle of the Hot Air Blower has Speed Control that Makes it light weight, efficient and easy to use.
3. When the handle is placed in the cradle, the hot air gun heater switches off automatically and starts fan to cool down.

Other Features of Soldron 878D

• Hybrid SMD Rework station with detachable hot air gun and soldering iron
• Micro-controller based 7 segment display
• 6 months manufacturer limited warranty
• Flow and temperature control of hot air blower
• ESD Safe

==>> Buy Soldron 878D Combined Soldering Station and Hot Air Blower